fbpx

The VLM TE Machine

Lay-as-you-go Manual Machine

From
R 22 500.00

Features: Manual operation

Option: Can be fitted with a 220 volt 1.5kw vibration motor for increased product density and quality

Operating Staff: ± 3

Project Type: Start-up block yard

Moulds:

Maxi brick mould (10 blocks per drop)

Stock brick mould (24 bricks per drop)

Hollow block mould (6 blocks per drop)

 STDDaily ProductionPictures
VLM-TE Hollow mould (390mm x 140mm x 190mm) produces 6 blocks per dropRManual: ± 1200
220Volt: ± 1800
VLM-TE Hollow mould (390mm x 90mm x 190mm) produces 8 blocks per dropRManual: ± 1600
220Volt: ± 2400
VLM-TE Hollow mould (390mm x 190mm x 190mm) produces 4 blocks per dropRManual: ± 800
220Volt: ± 1200
VLM-TE Maxi mould (290mm x 140mm x 90mm) produces 10 blocks per dropRManual: ± 2000
220Volt: ± 3000
VLM-TE Maxi mould (300mm x 110mm x 140mm) produces 8 blocks per dropRManual: ± 1600
220Volt: ± 2400
VLM-TE Stock mould (220mm x 105mm x 70mm) produces 24 blocks per dropRManual: ± 4800
220Volt: ± 7200
VLM-TE Stock mould (230mm x 115mm x 75mm) produces 22 blocks per dropRManual: ± 4400
220Volt: ± 6600
VLM-TE RIP slab block mould (400mm x 190mm x 200mm) produces 4 blocks per dropRManual: ± 800
220Volt: ± 1200
VLM-TE Hollow Mould (400mm x 150mm x 200mm) produces 6 x blocks per dropRManual: ± 1200
220Volt: ± 1800
VLM-TE Hollow Mould (450mm x 150mm x 220mm) produces 6 x blocks per dropRManual: ± 1200
220Volt: ± 1800
VLM-TE Hollow Mould (400mm x 200mm x 200mm) produces 4 x blocks per dropRManual: ± 800
220Volt: ± 1200
VLM-TE Hollow Mould (450mm x 220mm x 220mm) produces 4 x blocks per dropRManual: ± 800
220Volt: ± 1200
VLM-TE Hollow Mould (400mm x 100mm x 200mm) produces 8 x blocks per dropRManual: ± 1600
220Volt: ± 2400

Enquiry Form


    Related Products

    100L Stationary Electric Pan Mixer
    200L Stationary Electric Pan Mixer
    300L Stationary Electric Pan Mixer

    If it looks right, it might not work right… the crippling cost of fake equipment.

    We’ve all been faced with this situation before. You need equipment or a spares part, you’re a bit low on cash…and it becomes very tempting to take the easier, ‘cheaper’ route and get non-original parts. You save time, and money… right? Wrong!