The VLM TE Machine

Lay-as-you-go Manual Machine

From
R 22 500.00

Features: Manual operation

Option: Can be fitted with a 220 volt 1.5kw vibration motor for increased product density and quality

Operating Staff: ± 3

Project Type: Start-up block yard

Moulds:

Maxi brick mould (10 blocks per drop)

Stock brick mould (24 bricks per drop)

Hollow block mould (6 blocks per drop)

STDDaily ProductionPictures
VLM-TE Hollow mould (390mm x 140mm x 190mm) produces 6 blocks per dropRManual: ± 1200
220Volt: ± 1800
VLM-TE Hollow mould (390mm x 90mm x 190mm) produces 8 blocks per dropRManual: ± 1600
220Volt: ± 2400
VLM-TE Hollow mould (390mm x 190mm x 190mm) produces 4 blocks per dropRManual: ± 800
220Volt: ± 1200
VLM-TE Maxi mould (290mm x 140mm x 90mm) produces 10 blocks per dropRManual: ± 2000
220Volt: ± 3000
VLM-TE Maxi mould (300mm x 110mm x 140mm) produces 8 blocks per dropRManual: ± 1600
220Volt: ± 2400
VLM-TE Stock mould (220mm x 105mm x 70mm) produces 24 blocks per dropRManual: ± 4800
220Volt: ± 7200
VLM-TE Stock mould (230mm x 115mm x 75mm) produces 22 blocks per dropRManual: ± 4400
220Volt: ± 6600
VLM-TE RIP slab block mould (400mm x 190mm x 200mm) produces 4 blocks per dropRManual: ± 800
220Volt: ± 1200
VLM-TE Hollow Mould (400mm x 150mm x 200mm) produces 6 x blocks per dropRManual: ± 1200
220Volt: ± 1800
VLM-TE Hollow Mould (450mm x 150mm x 220mm) produces 6 x blocks per dropRManual: ± 1200
220Volt: ± 1800
VLM-TE Hollow Mould (400mm x 200mm x 200mm) produces 4 x blocks per dropRManual: ± 800
220Volt: ± 1200
VLM-TE Hollow Mould (450mm x 220mm x 220mm) produces 4 x blocks per dropRManual: ± 800
220Volt: ± 1200
VLM-TE Hollow Mould (400mm x 100mm x 200mm) produces 8 x blocks per dropRManual: ± 1600
220Volt: ± 2400

Enquiry Form


    If it looks right, it might not work right… the crippling cost of fake equipment.

    We’ve all been faced with this situation before. You need equipment or a spares part, you’re a bit low on cash…and it becomes very tempting to take the easier, ‘cheaper’ route and get non-original parts. You save time, and money… right? Wrong!